It has 4 main components: a control terminal, electric steering wheel, GNSS receiver, and angle sensor. Plus some accessories and wires. You can refer to the manual for details.
Yes, all of the components have to work together.
The difference between the F100 Auto Steer System and F100 with Advanced Mode is mainly in the functions.
Both of them can achieve 2.5cm high precision navigation and the setting of the guidance line (straight line and curve line).
Therefore, the F100 Auto Steer System can meet farmers' daily needs for farming.
When you have higher demands for the functions, such as U-turn auto drive and filed management, then you can purchase the F100 Advanced Mode (software upgrade) or the package of F100 Auto Steer System with Advanced Mode directly.
Yes, our kits can be used on regular or irregular fields. Like triangular or polygonal fields, you can plan your route in areas.
If you want to upgrade your system, you will need to connect to a network (4G wireless network or mobile hotspot, etc.).
The ability to upgrade without a network will be available soon. If you are farming in a field, then the system will need to be used with the NTRIP network protocol or RTK base station for proper use.
Step 1: Contact us via firstname.lastname@example.org and send us the SN of your control terminal through [System Setting - About - SN];
Step 2: Tap [System Upgrade - Detect] after confirmation with our AE team;
Step 3: Upgrade the system when network coverage is available.
It depends on your needs. RTK is recommended if you need high-precision operations.
If not, you can choose the SBAS function (coming soon). Services including WAAS, EGNOS, MSAS, and SDCM are provided for free.
No, the system uses a high-torque electric steering wheel and works with a GNSS receiver.
Currently 29 languages are available: English, Turkish, Thai, Simplified Chinese, Traditional Chinese, Korean, Russian, Spanish, Hungarian, Finnish, Swedish, French, German, Czech, Portuguese, Serbian (Latin), Polish, Romanian，Ukrainian，Bulgarian，Lithuanian，Dutch，Slovak，Italian，Japanese，Danish，Croatian，Slovenian，Greek，Norwegian.
The control terminal is a valuable HMI that displays real-time operation information of auto steering, such as the history, running speed, offset, and area metering for advanced mode ...
Yes, you can click the auto mode button on the screen to switch to manual mode. If you can't touch the screen, you can turn or hold it steady for 2-3s to switch to manual mode.
1. For RTK, we provide correction signals through NTRIP and Base Station;
2. For SBAS, we provide correction signals through WAAS, EGNOS, MSAS, and SDCM.
The F100 Auto Steer System will calculate the working area in real time while you are farming.
If you want to calculate the total area of the field, you need to upgrade to F100 Advanced Mode, which unlocks field management. This function calculates the size of the field, manages the field boundaries, manages the guidance line of the field, etc.
The F100 Auto Steer System includes two guidance line modes, straight and curved. And the F100 with Advanced Mode has three guidance line modes: straight, curved, and pivoted.
Sure, we're always working on improving our products. Headland, A+ guidance line modes, equal-interval prompt, ISOBUS, etc. You just need to upgrade the system online if we only update the software.
However, if there are any other changes or updates on the hardware, please purchase a part as needed.
Some new functions will be free. While some of them, such as the upcoming ISOBUS VT/TC, need to be paid.
Yes, NMEA cable is optional and you can buy one as needed.
Our system is compatible with 90% of all tractor, transplanter, sprayer, and harvester brands and models on the market.
Whether your equipment is a front-drive, or rear-drive type, you can first check yourself in the F100 compatibility table.
If you don't find the make and model of your equipment on the table, you can contact us via email@example.com. Leave your equipment brand and model and we will have our technicians do the compatibility test.
Yes, 1 year for all parts and complete machines.
No, it is easy to use! We will provide several helpful videos and files once you buy our system to help you.
After you purchase, we will pair you with 1v1 AE staff to provide online installation, upgrades, and guidance on how to use it. If you need on-site after-sales service, you can contact us to apply. (Please note that on-site service requires payment.)
Orders paid on working days will be processed for shipment within 48 hours, and in case of special situations, we will notify you via email the first time. Orders placed on holidays or weekends will be processed with high priority when we resume work.
For European orders, we ship from our Swedish warehouse. For US orders, we ship from our US warehouse. The expected delivery time will normally be 7-20 days, and the actual arrival date will be based on the estimated time shown on the tracking number.
We support online trading in Europe, the USA, Canada, New Zealand, and Australia countries.
Our system is compatible with 90% of all tractor, transplanter, sprayer, and harvester brands and models on the market. Whether your equipment is a front-drive, or rear-drive type, you can first check yourself in the F100 compatibility table. If you don't find the make and model of your equipment on the table, you can contact us via firstname.lastname@example.org. Leave your equipment brand and model and we will have our technicians do the compatibility test.
It contains both hardware and software.
The hardware has 4 main components: a control terminal, electric steering wheel, GNSS receiver, and angle sensor. Plus some accessories and wires. You can refer to the manual.
For the software part, we will send you the software activation code by email after you finish the payment for F100 with advanced mode.
It is impossible to turn the U-turn on/off in a task, you have to exit the task and enter advanced mode to do so; However, it is possible to change the driving direction of the U-turn or manual/automatic during the task.
Step 1: Purchase the F100 Advanced Mode to get the activation code.
Step 2: Open the system > Tap Settings > System Settings > Mode Selection > Activate
Step 3: Enter the activation code in the pop-up dialog, and tap OK.
Step 4: After the activation code is verified, an Information Confirmation dialog pops up. If the code is correct, click confirm to activate.
Step 5: After the mode is activated, the user can view its status and the advanced mode interface, and the functions including field task, U-turn, and so on can be used.
When you tap the record button on the screen, the system will start counting acres; the historical data will keep information on each operation (time, which field, which baseline, operation length, operation track).
We will provide screws. You can fix it by screwing it or with 3M adhesive stickers.
The waterproof rating of the GNSS receiver is IP66, and the steering wheel and control terminal are both IP65. Therefore, the 2.5cm high precision system supports your operation at night, in rain and snow.
You can click on the record button at the bottom right of the screen.
(1) Search for available Bluetooth devices again or clear the list of paired devices and connect again.
(2) Restart RTK Assistant app and connect again.
(3) Restart the Sveaverken V1 receiver and the controller/Android phone and connect again.
(1) Go to an open place, and restart the receiver.
(2) Restart the receiver, and wait 10 min to check the satellite communication again. Because it takes a while for the receiver to load the ephemeris data again after long distance transportation or long downtime.
(3) Check the V1 firmware version and upgrade the firmware to the latest version. Please ask our technician for help.
(1) Place the base station at the center of the jobsite.
(2) Place the base station in a location that has a clear line of sight to the sky in all directions. Ensure that there are no large areas of obstructions in the overhead space with an angle larger than 5°-15° to the receiver antenna.
(3) Set up the base station at least 200 m away from overhead power lines or other sources of electromagnetic waves to avoid interference with GNSS receiver operation.
(4) Do not set up the base station in a location having strong reflection of electromagnetic waves, to reduce multipath from the surrounding area such as a large expanse of water.
(5) Place the base station as high as practical to facilitate transmission of radio signals.
(6) Set up the base station in an easily accessible area.
Yes, it does, and the temperature controller reads the temperature every 5 seconds.
The lamp radiates infrared rays to heat objects around it. When reaching an object, some of the far infrared rays are reflected, some pass through the object, and only those with a wavelength as the absorption wavelength of the object are absorbed. The absorbed far infrared rays accelerate the molecule and atom motion of the object, increasing its temperature.
① The bulb can be set as automatic mode with APP, then you can set the birth date of piglets, our heat lamp will automatically adjust to the appropriate temperature according to the different growth stages of piglets;
It can also be set as manual mode, then you can set a constant temperature or constant power, our heat lamp will be real-time detection of whether the environment temperature reaches the set constant temperature or power.
If not reached, it will be real-time automatic adjustment once 5s detection, to ensure the temperature accuracy is of ± 5 ℃.
② The infrared rays contained in the bulb can significantly reduce piglet mortality.
③ 46% less energy consumption, reducing the operating cost.
④ Easy control of up to 100 lamps with an app. Less labor cost for bulb adjustment.
⑤ Automatic calculation of optimum operating power, improving energy efficiency.
⑥ Stepless adjustment of bulb brightness, improving the living conditions of animals.
The app can connect a maximum of 100 lamps. Usually, it is recommended to connect 50 lamps.
In addition to pigpens, heat lamps can be used in spaces requiring temperature control such as poultry houses and greenhouses. With stepless adjustment of bulb brightness, the heat lamps are suited for various application scenarios.
The bulb service life is 5000h.
No, it is not necessary.
Each heat lamp comes with a 175W bulb. You can use your own infrared tungsten bulbs rated at 175W.
The temperature can be adjusted within a range of 22℃ to 36℃. You do not need to use the lamp when the ambient temperature is higher than 36℃.
① Assemble all the parts of the heat lamp according to the operations manual.
② Enable Bluetooth on your phone or tablet, launch the app, and then tap the plus icon in the upper right corner. Devices available for connection are displayed on the app.
③ Tap the device to bind it, and tap the back icon to return to the home screen. Then, you are able to control the lamp with the app.
Check whether Bluetooth is enabled on your phone or tablet and ensure that the distance between your phone or tablet and the lamp is within the communication range.
Check whether the lamp works normally. If so, ensure that the distance between your phone or tablet and the lamp is less than 70m.
① Flashing red: The controller is not connected to a bulb or not bound to the app.
② Always red: No bulb is connected to the controller, or the controller is faulty though bound to the app.
③ Flashing red and green: The lamp is reset.
④ Always green: The lamp works normally.